M35 cobalt 5% cobalt added for added hardness and heat resistance. Rockwell hardness is up to 67. It can cut faster and has a long life, up to 12 times compared to the average HSS bit.

Self-centering! The 135 u00b0 cutting guide gap is self-centering, which can penetrate quickly with less pressure. The straight shank can be fixed firmly and precisely centered, which is suitable for standard chuck and conventional round chuck.

Efficient drilling without walking. Remove chips and particles easier and faster.

Lowest cost per hole drilled. The solid cobalt steel bit body can be re-sharpened.

Split point? Drill directly to size without pre-drilling

Fully ground Fully rugged ground body construction for minimal burr and accurate diameter.

Drill bits for metal. Suitable for drilling non-heat treated metals, whose hardness is lower than HRC38, such as stainless steel, copper cast iron, galvanized pipe, iron and aluminum alloy. Not suitable for mild steel / high carbon steel. If penetration is not possible, try adjusting the speed.

ufeff

ufeffNote:

Cobalt bits require slow RPM when drilling metals. Suggested RPMs are for your reference only. It can vary from different materials. You can start from a lower RPM and adjust it more slowly. Once the bit can enter the workpiece. Adjustment should be stopped.

Specification

Package Included:

ufeffufeffufeffufeff